One-off or prototype
A single sample for a desk, display case, media room, studio, workshop or an unusual spatial constraint.
Custom / maker-built / small batch
From a one-off idea to a small-batch lighting system.
Bring the effect, dimensions or constraint you have in mind. We help shape the light engine, finish and control path around your build.
Best starting point
Use case + dimensions + quantityTechnical status shown per item
A practical route for unusual builds Custom DIY
Start a configuration
A photo, a sketch or a short sentence is enough to start a human review. We can sell the closest hardware or manufacture the missing piece around your constraint.
A practical route for unusual builds
From a rough idea to a documented configuration.
Use this page when a standard product card is close but not quite right. We review the physical light first, then the driver, control path, wiring and installation boundary. The result may be a configured product from the catalog, a one-off sample made around your constraint or a recommendation that a different approach is safer.
We are both a lighting seller and a manufacturer. Buy the closest standard hardware when it fits, or work with us on custom strips, neon flex, profiles, housings, controllers, power assemblies and complete lighting systems when the project needs something different.
Start with the parts and dimensions you know. We will help fill in the missing details and explain what still needs checking before you build.
Small-batch kit
A repeatable run for a DIY build, usually with a frozen BOM, sample record and revision notes.
Custom light engine or housing
A different length, density, cut interval, color temperature, RGBW mix, profile, diffuser, cable or connector.
Control-path build
A known route for WLED, Home Assistant, Zigbee, Matter or another protocol after the exact hardware is reviewed.
What can be customized
Keep the physical product and the smart layer visible.
A useful custom reply names the fixed decisions, the selectable decisions and the one measurement that should happen before a batch.
Strip, neon flex, linear light, module or fixture; choose output, density, CCT, RGBW, pixel behavior and cut interval.
Profile, diffuser, housing, mounting, bend direction, cutout, end treatment and service access.
Voltage, driver, controller, cable, connector, fuse, injection point, branch layout and thermal boundary.
Sample photos, measured values, tested control path, known limits, variant label and revision record.
For makers and integrators
Useful for the project that does not fit a retail kit.
Bring a media-room wall wash, a display cabinet, a workbench, a custom sign, a small art installation, a prototype fixture or a repeatable home-automation build. We can review a single sample or a small batch, subject to the light engine, materials, target market and production feasibility.
DIY KITParts selected around your actual dimensions
Keep the light, power, control and mounting parts together instead of adapting a generic kit after it arrives.
OPEN CONTROLProtocol chosen after the output is known
WLED, Home Assistant, Zigbee, Matter and other paths are treated as separate validation questions.
REVISIONSample first, then decide whether to repeat
Photograph the approved build and keep the BOM, wiring and limits attached to the project record.
How the review works
Requirement -> sample -> test -> batch.
This is a technical intake, not an instant checkout. The scope and timing are confirmed after the requirement and target market are understood.
01 / REVIEW
Requirement
Use case, dimensions, light quality, quantity, country, protocol and deadline.
02 / BUILD
Sample
Choose the mechanical, optical, electrical and controller variant for one concrete test.
03 / VERIFY
Test
Check fit, light behavior, power, heat, wiring, pairing and the exact integration boundary.
04 / FREEZE
Revision
Record the public SKU, BOM, known limits, support boundary and any remaining open question.
05 / SCALE
Batch
Discuss supply, inspection, packaging, certification and support for the selected market.
Start a custom build
Tell us the need in your own words.
We will use the details to choose a likely product family, identify missing measurements and reply with the next useful step. You do not need to know the SKU or protocol yet. The pre-purchase review and configuration guidance are included at no extra charge; hardware, samples and custom manufacturing are quoted separately after the scope is clear.
What to send
- A short description of what the light should do and where it will go
- Approximate dimensions or the constraint, if you know it
- A product link, photo or drawing only when it helps explain the idea
Shipping, tax, certification, warranty and support are confirmed for the target market and final configuration. This review does not replace local mains installation, code review or a qualified electrician.