Product details
voice assistant LED Bedside Lamp
LumaCircuit offers voice assistant LED Bedside Lamp as a configurable bulb for project builds. Typical applications include Everyday room lighting, Kitchen and cabinet task light, Retail and commercial fit-outs. Working Voltage: 100-240V, 50/60Hz Power: 5W(6*1W/LED Module(W) + 6*0.5W/LED Module(RGB)) Color Rendering Index: Ra 80 The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering. Use this product on the everyday Zigbee route. A Zigbee gateway or coordinator is required, and ZHA, Zigbee2MQTT and Tuya Gateway must be validated as separate paths on the exact driver, controller and firmware combination. For a project brief, include the selected voltage, dimensions, driver and control details so the configuration can be reviewed efficiently.
Product features
The following details summarize the physical characteristics and configuration options for this product. Use the selected variant and production drawing to finalize dimensions and electrical details.
- The voice assistant LED Bedside Lamp uses high-quality SMD LEDs as the light source, with built-in White and RGB LED Modules. The color and brightness are adjustable, offering the proper brightness and color temperature to create the desired ambiance. The installer can double-tap the LED Lamp to turn it on or off, and long-press it to switch the mode from color temperature to color. Under the color temperature mode, slide backward or forward to increase or decrease the temperature.
- Working Voltage: 100-240V, 50/60Hz
- Power: 5W(6*1W/LED Module(W) + 6*0.5W/LED Module(RGB))
- Color Rendering Index: Ra 80
- Wireless Connection: Wi-Fi IEEE 802./g/n 2. And Bluetooth 4.2 BLE
- Working Temperature: -10℃-40℃
- Operating Humidity: 0%-85% RH
- Support Operating Systems: Android 4.4 Or IOS 9.0 And Later
Configuration and technical detail
To configure this product, specify the LumaCircuit SKU, required voltage, light engine, dimensions or cutout, driver/controller and finish or protection variant. The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering.
- Input: 240 V / 5 V
- Light engine: RGB
- Size: 140*100mm
- Working Voltage: 100-240V, 50/60Hz
- Power: 5W(6*1W/LED Module(W) + 6*0.5W/LED Module(RGB))
- Color Adjustment: WRGB
- Color Rendering Index: Ra 80
- Input: DC5V/1A
- Power Factor: 0.45
- Working Temperature: -10℃-40℃
- LumaCircuit model: LC-BLB-H2X4T1
- Dimensions found: 140x100mm / 100mm / 6x0
Control and installation
Use this product on the everyday Zigbee route. A Zigbee gateway or coordinator is required, and ZHA, Zigbee2MQTT and Tuya Gateway must be validated as separate paths on the exact driver, controller and firmware combination.
Plan the installation around Everyday room lighting, Kitchen and cabinet task light, Retail and commercial fit-outs. Keep power, signal, heat path, access and service joints visible in the drawing.
Configuration support
Pricing follows the selected setup. Share the required voltage, dimensions or cutout, light engine, driver/controller and finish or protection option so the product can be specified accurately.
Product overview
The voice assistant LED Bedside Lamp uses high-quality SMD LEDs as the light source, with built-in White and RGB LED Modules. The color and brightness are adjustable, offering the proper brightness and color temperature to create the desired ambiance. The installer can double-tap the LED Lamp to turn it on or off, and long-press it to switch the mode from color temperature to color. Under the color temperature mode, slide backward or forward to increase or decrease the temperature. Under the color mode, slide in any direction to adjust the RGB colors. The lamp's soft contours speak to your sense of aesthetics, with the flowing color mode on, the light automatically cycles through different colors and ambiance, perfectly jazzing it up for your relaxing evening. The voice assistant Bedside Lamp can work with smart home platforms like the Apple HomeKit, Google Assistant, Amazon Alexa, and Samsung SmartThings. The installer can use your voice to control the Lamp.
Specifications
Size: 140*100mm
Working Voltage: 100-240V, 50/60Hz
Power: 5W(6*1W/LED Module(W) + 6*0.5W/LED Module(RGB))
Color Adjustment: WRGB
Color Rendering Index: Ra 80
Wireless Connection: Wi-Fi IEEE 802./g/n 2. And Bluetooth 4.2 BLE
Input: DC5V/1A
Power Factor: 0.45
Working Temperature: -10℃-40℃
Operating Humidity: 0%-85% RH
Support Operating Systems: Android 4.4 Or IOS 9.0 And Later
Can Works With Smart Home Platforms: Apple HomeKit, Google Assistant, Amazon Alexa, Samsung SmartThings
ON/OFF With Double Tap
Versatile All-Rounder
Colorful Soft Light
Color Temperature And Brightness Adjustable
Colorful Soft Light To Flavor Your Life
Includes
1 * Led Bedside Lamp
Typical applications
- Everyday room lighting
- Kitchen and cabinet task light
- Retail and commercial fit-outs