Product details
DC12V Dimmer Switch For LED
LumaCircuit offers DC12V Dimmer Switch For LED as a configurable LED controller for project builds. Typical applications include CCT and RGB+CCT rooms, Retrofit dimming, Home Assistant lighting zones. Working Voltage: DC12V/DC24V Connect Mode: Common Anode Output Current: <8A(Each Channel) The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering. Use this product on the everyday Zigbee route. A Zigbee gateway or coordinator is required, and ZHA, Zigbee2MQTT and Tuya Gateway must be validated as separate paths on the exact driver, controller and firmware combination. For a project brief, include the selected voltage, dimensions, driver and control details so the configuration can be reviewed efficiently.
Product features
The following details summarize the physical characteristics and configuration options for this product. Use the selected variant and production drawing to finalize dimensions and electrical details.
- The dimmer switch for LED adopts the advanced PWM digital dimming technology, which can work in DC12V or DC24V, with 3 channels of output, and a max output of 24A. This new LED dimmer is specially designed for single-color LED strips, 3528, 5050, 2835, and 5730, and comes with an RF touch remote control. The remote has five function buttons and one dimming ring, which has 128 levels of different brightness values. The sense of light in the remote center shows the exact light that is touched.
- Working Voltage: DC12V/DC24V
- Connect Mode: Common Anode
- Output Current: <8A(Each Channel)
- Output Power: 12V: <288W; 24V: <576W
- RF Frequency: 433.92 MHz
- 1 * Dimmer Switch For LED
- dimmer switch for LED, working in or DC24V, max output current 24A, three channels, max output wattage comes with touch remote, adopt network cable port.
Configuration and technical detail
To configure this product, specify the LumaCircuit SKU, required voltage, light engine, dimensions or cutout, driver/controller and finish or protection variant. The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering.
- Input: 12 V / 24 V
- Working Voltage: DC12V/DC24V
- Output: 3 Channels
- Connect Mode: Common Anode
- Size: 91*88*24mm
- Output Gray: 256 Levels
- Output Current: <8A(Each Channel)
- Output Power: 12V: <288W; 24V: <576W
- RF Frequency: 433.92 MHz
- LumaCircuit model: LC-CTL-GVLEIJ
- Dimensions found: 91x88x24mm / 24mm
Control and installation
Use this product on the everyday Zigbee route. A Zigbee gateway or coordinator is required, and ZHA, Zigbee2MQTT and Tuya Gateway must be validated as separate paths on the exact driver, controller and firmware combination.
Plan the installation around CCT and RGB+CCT rooms, Retrofit dimming, Home Assistant lighting zones. Keep power, signal, heat path, access and service joints visible in the drawing.
Configuration support
Pricing follows the selected setup. Share the required voltage, dimensions or cutout, light engine, driver/controller and finish or protection option so the product can be specified accurately.
Product overview
The dimmer switch for LED adopts the advanced PWM digital dimming technology, which can work in DC12V or DC24V, with 3 channels of output, and a max output of 24A. This new LED dimmer is specially designed for single-color LED strips, 3528, 5050, 2835, and 5730, and comes with an RF touch remote control. The remote has five function buttons and one dimming ring, which has 128 levels of different brightness values. The sense of light in the remote center shows the exact light that is touched. Three dynamic modes in the mode button, and the speed is adjustable. The LED dimmer switch is designed with a synchronization function, making it convenient to use the connector to connect multiple controllers, and it can control more LED strips in synchronization.
Specifications
Working Voltage: DC12V/DC24V
Output: 3 Channels
Connect Mode: Common Anode
Size: 91*88*24mm
Output Gray: 256 Levels
Output Current: <8A(Each Channel)
Output Power: 12V: <288W; 24V: <576W
RF Frequency: 433.92 MHz
Weight: 300g
Applications
1 * Dimmer Switch For LED
1*Touch Remote
Typical applications
- CCT and RGB+CCT rooms
- Retrofit dimming
- Home Assistant lighting zones