4G DC5V RGB/CCT/Dim 3 In 1 WIFI LED Controller

Product features

The following details summarize the physical characteristics and configuration options for this product. Use the selected variant and production drawing to finalize dimensions and electrical details.

• The RGB/CCT/DIM 3 In 1 WIFI LED controller with the multi-zones control function can control each zone lighting effect independently, supporting up to 10 separate zones. Combined with WIFI technology, the control is more advanced, intelligent, and convenient. The installer can customize the area photos yourself or connect the LED WiFi controller to your family router through your smartphone with an Android or iOS system. Install the corresponding control software to control the change of the LED lights.
• Working Temperature: -20-60℃
• Size: 108*63*28mm(L*W*H)
• WIFI Brightness Level: 1-100%
• WIFI Speed Level: 100 Grade
• Remote Control Brightness Level: 1-100%
• Remote Control Speed Level: 100 Grade
• Receiver Remote Frequency: 2.4G

Configuration and technical detail

To configure this product, specify the LumaCircuit SKU, required voltage, light engine, dimensions or cutout, driver/controller and finish or protection variant. The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering.

• Input: 5 V
• Light engine: CCT
• Working Temperature: -20-60℃
• Size: 108*63*28mm(L*W*H)
• Working Voltage: DC5V
• Static Current: <1W
• Output: 2.
• Remote Control Brightness Level: 1-100%
• Remote Control Speed Level: 100 Grade
• Wifi Frequency: 2.4G
• Receiver Remote Frequency: 2.4G
• LumaCircuit model: LC-CTL-9VKQL2

Control and installation

Use this product on the everyday Zigbee route. A Zigbee gateway or coordinator is required, and ZHA, Zigbee2MQTT and Tuya Gateway must be validated as separate paths on the exact driver, controller and firmware combination.

Plan the installation around CCT and RGB+CCT rooms, Retrofit dimming, Home Assistant lighting zones. Keep power, signal, heat path, access and service joints visible in the drawing.

Configuration support

Pricing follows the selected setup. Share the required voltage, dimensions or cutout, light engine, driver/controller and finish or protection option so the product can be specified accurately.

Product overview

The RGB/CCT/DIM 3 In 1 WIFI LED controller with the multi-zones control function can control each zone lighting effect independently, supporting up to 10 separate zones. Combined with WIFI technology, the control is more advanced, intelligent, and convenient. The installer can customize the area photos yourself or connect the LED WiFi controller to your family router through your smartphone with an Android or iOS system. Install the corresponding control software to control the change of the LED lights. The 2.4G WiFi LED controller with a 3-in-1 design can be used as a dimmer, CCT, or RGB Controller. You only need to select the right control interface in the software, and the installer can use it to control various LED lights, RGB LED strips, color-changing LED modules, etc. The WiFi LED controller can also be controlled by a 2.4G RF multi-zone remote control, which the installer can purchase separately from us.

Specifications

Working Temperature: -20-60℃

Size: 108*63*28mm(L*W*H)

Working Voltage: DC5V

Static Current:<1W

Output: 2.

WIFI Brightness Level: 1-100%

WIFI Speed Level: 100 Grade

Remote Control Brightness Level: 1-100%

Remote Control Speed Level: 100 Grade

Wifi Frequency: 2.4G

Receiver Remote Frequency: 2.4G

Receiving Sensitivity: 802.:DSSS（-）802.:CCK802.11g:OFDM

Weight: 250g

RF Remote Control Specifications

Working Temperature: -20℃-60℃

Power Supply: AAA*2 Batteries

Standby Current

Working Current

Remote Control Distance: ≤30m

RF Frequency: 2.4G

Power Consumption: 0.

1 * WIFI LED Controller