Product details
WP Waterproof 5 In 1 RGB WiFi Controller
LumaCircuit offers WP Waterproof 5 In 1 RGB WiFi Controller as a configurable LED controller for project builds. Typical applications include CCT and RGB+CCT rooms, Retrofit dimming, Home Assistant lighting zones. wireless controller Waterproof RGB WiFi Controller User Manual Size: 136*87*31mm(L*W*H) Output Current: 6A/Channel The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering. Use this product on the everyday Zigbee route. A Zigbee gateway or coordinator is required, and ZHA, Zigbee2MQTT and Tuya Gateway must be validated as separate paths on the exact driver, controller and firmware combination. For a project brief, include the selected voltage, dimensions, driver and control details so the configuration can be reviewed efficiently.
Product features
The following details summarize the physical characteristics and configuration options for this product. Use the selected variant and production drawing to finalize dimensions and electrical details.
- The wireless controller waterproof RGB WiFi controller, with a 5-in-1 function design and an waterproof level is IP67, allows you to use it in a wet, damp, or water location for the single color, CCT, RGB, RGBW, and RGBWW LED strips the product has five output modes designed, and the installer can press the set button on the controller to change the output mode.
- wireless controller Waterproof RGB WiFi Controller User Manual
- Size: 136*87*31mm(L*W*H)
- Output Current: 6A/Channel
- Total Output Current: Max 20A
- Communication Mode: WiFi-IEEE 802./g/n 2.
- Remote Control Distance: ≤30m
- IP Rating: IP67 Waterproof
Configuration and technical detail
To configure this product, specify the LumaCircuit SKU, required voltage, light engine, dimensions or cutout, driver/controller and finish or protection variant. The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering.
- Input: 12-36 V
- Light engine: RGB+CCT
- Size: 136*87*31mm(L*W*H)
- Working Voltage: -36V
- Output Current: 6A/Channel
- Total Output Current: Max 20A
- Communication Mode: WiFi-IEEE 802./g/n 2.
- Remote Control Distance: ≤30m
- IP Rating: IP67 Waterproof
- 5 Output Modes Available: Brightness, Color Temperature, RGB, RGBW, RGBWW
- Compatible With 2. RF Remote Controls: T4, T3,
- 4G Network Controllable: YES
Control and installation
Use this product on the everyday Zigbee route. A Zigbee gateway or coordinator is required, and ZHA, Zigbee2MQTT and Tuya Gateway must be validated as separate paths on the exact driver, controller and firmware combination.
Plan the installation around CCT and RGB+CCT rooms, Retrofit dimming, Home Assistant lighting zones. Keep power, signal, heat path, access and service joints visible in the drawing.
Configuration support
Pricing follows the selected setup. Share the required voltage, dimensions or cutout, light engine, driver/controller and finish or protection option so the product can be specified accurately.
Product overview
The wireless controller waterproof RGB WiFi controller, with a 5-in-1 function design and an waterproof level is IP67, allows you to use it in a wet, damp, or water location for the single color, CCT, RGB, RGBW, and RGBWW LED strips the product has five output modes designed, and the installer can press the set button on the controller to change the output mode. The WiFi light controller has built-in 2.4G transmission technology, is compatible with 2.4G RF remote controls, and has a control distance of up to 30 meters. After adding the 2.4G gateway WL the Smartphone APP, and third-party voice commands can control the waterproof LED controller. The installer can set the static color or dynamic modes, and there are 16 million colors available, adjust the saturation, brightness, and color temperature(2700K-6500K). One controller will receive the signals and transmit them to others within 30 meters; all will work synchronously. The LED lights can be grouped through the mobile phone APP, or the remote control can control multiple LED lights simultaneously and independently for each group. Users can set the light on or off time according to their needs and manage their LED lights more easily.
Quick Links
wireless controller Waterproof RGB WiFi Controller User Manual
Specifications
Size: 136*87*31mm(L*W*H)
Working Voltage: -36V
Output Current: 6A/Channel
Total Output Current: Max 20A
Communication Mode: WiFi-IEEE 802./g/n 2.
RF: 2.
Remote Control Distance: ≤30m
IP Rating: IP67 Waterproof
5 Output Modes Available: Brightness, Color Temperature, RGB, RGBW, RGBWW
16 Million Colors Available
Saturation Adjustment
Brightness And Color Temperature Adjustable
Compatible With 2. RF Remote Controls T4, T3,
Support Smartphone APP Control And Third-Party Voice Control(2.4G Gateway WL- Needed)
Signal Transmitting And Modes Synchronization
4G Network Controllable: YES
Group Control: YES
Timing Function: YES
Working Temperature: -20℃-+45℃
Includes
1 * Waterproof RGB WiFi Controller
Product resources
Technical documents
Typical applications
- CCT and RGB+CCT rooms
- Retrofit dimming
- Home Assistant lighting zones