LumaCircuit / configurable product

Battery Powered 2835 LED Strips With Sensor

A production-ready strip family with a replaceable Zigbee control path.

Zigbee Everyday Lighting / gateway required DIY starting point
SKU: LC-STR-YXSA44DIY starting pointCustom configuration available
Voltage
5 V
Light engine
CCT
Length
1 Meter, 2 Meter, 3 Meter
Width
8mm
ConfigurationBase configurationZigbee 3.0 gateway
Selected SKULC-STR-YXSA44Zigbee 3.0 driver/controller -> gateway or coordinator
PriceUS$5
AvailabilityDIY starting point
Request a sample View specifications

A Zigbee gateway or coordinator is required. ZHA, Zigbee2MQTT and Tuya Gateway are separate validation paths.

Compatibility and configuration
Home AssistantHome Assistant via validated ZHA, Zigbee2MQTT or Tuya path
Tuya / Smart LifeNo validated Tuya path on this configuration
GatewayDepends on the selected controller or driver
Control pathZigbee 3.0 driver/controller -> gateway or coordinator
  • ZigbeeZigbee 3.0 driver/controller by configuration; coordinator path requires validation / gateway required

Product details

Battery Powered 2835 LED Strips With Sensor

LumaCircuit offers Battery Powered 2835 LED Strips With Sensor as a configurable LED strip for project builds. Typical applications include Everyday room lighting, Kitchen and cabinet task light, Retail and commercial fit-outs. Colors: Pure White(6000K), Warm White( 3000K) Length: 1 Meter, 2 Meter, 3 Meter LED Quantity: 60 LEDs/Meter The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering. Use this product on the everyday Zigbee route. A Zigbee gateway or coordinator is required, and ZHA, Zigbee2MQTT and Tuya Gateway must be validated as separate paths on the exact driver, controller and firmware combination. For a project brief, include the selected voltage, dimensions, driver and control details so the configuration can be reviewed efficiently.

Product features

The following details summarize the physical characteristics and configuration options for this product. Use the selected variant and production drawing to finalize dimensions and electrical details.

  • The battery powered 2835 LED strips with sensor, which uses the high-quality 2835 SMD LEDs as the light source, 60LEDs per meter, there are three lengths products available, and the LED strips with waterproof coating, the IP rating can reach IP65, the back with double side adhesive tape, take off the protector on the tape and can stick the LED strips on the place you want to use, easy to install.
  • Colors: Pure White(6000K), Warm White( 3000K)
  • Length: 1 Meter, 2 Meter, 3 Meter
  • LED Quantity: 60 LEDs/Meter
  • Powered By 4PCS AAA Batteries(Sold Separately)
  • Comes With PIR Motion Sensor
  • Sensing Distance: 2-4 meters
  • Delay-Off Light Adjustable

Configuration and technical detail

To configure this product, specify the LumaCircuit SKU, required voltage, light engine, dimensions or cutout, driver/controller and finish or protection variant. The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering.

  • Input: 5 V
  • Light engine: CCT
  • Colors: Pure White(6000K), Warm White( 3000K)
  • Length: 1 Meter, 2 Meter, 3 Meter
  • Width: 8mm
  • Working Voltage: 5V
  • LED: 2835 SMD LEDs
  • LED Quantity: 60 LEDs/Meter
  • CRI: >
  • IP Rating: IP65
  • LumaCircuit model: LC-STR-YXSA44
  • Dimensions found: 8mm

Control and installation

Use this product on the everyday Zigbee route. A Zigbee gateway or coordinator is required, and ZHA, Zigbee2MQTT and Tuya Gateway must be validated as separate paths on the exact driver, controller and firmware combination.

Plan the installation around Everyday room lighting, Kitchen and cabinet task light, Retail and commercial fit-outs. Keep power, signal, heat path, access and service joints visible in the drawing.

Configuration support

Pricing follows the selected setup. Share the required voltage, dimensions or cutout, light engine, driver/controller and finish or protection option so the product can be specified accurately.

Product overview

The battery powered 2835 LED strips with sensor, which uses the high-quality 2835 SMD LEDs as the light source, 60LEDs per meter, there are three lengths products available, and the LED strips with waterproof coating, the IP rating can reach IP65, the back with double side adhesive tape, take off the protector on the tape and can stick the LED strips on the place you want to use, easy to install. The battery box with a sensor included, powered by 4PCS AAA batteries, and with a PIR motion sensor, the installer can switch the working mode from moon to sun. If the sensor is working in sun mode, it will light up when someone is close to the sensor, whether at night or during the day. If working on the moon mode, it only works at night. The installer can set the delay-off light time from 15 seconds to 5 minutes. The installer can install them in the corridor, around the bed, the stairs, the kitchen, etc.

Specifications

Colors: Pure White(6000K), Warm White( 3000K)

Length: 1 Meter, 2 Meter, 3 Meter

Width: 8mm

Working Voltage: 5V

LED: 2835 SMD LEDs

LED Quantity: 60 LEDs/Meter

Luminous Flux: 20lm/LED

CRI: >

IP Rating: IP65

Powered By 4PCS AAA Batteries(Sold Separately)

Comes With PIR Motion Sensor

Sensing Distance: 2-4 meters

Sensing Angle: 140°

Delay-Off Light Adjustable

Includes

1 * 2835 LED Strip With Sensor

Typical applications

  • Everyday room lighting
  • Kitchen and cabinet task light
  • Retail and commercial fit-outs

System BOM / starting point

What belongs around this part.

A complete installation keeps the supporting power, control and mechanical pieces visible. Use the list below as a starting BOM and match each item to the selected configuration.

Open BOM builder
01Selected product configuration
02Product photography and technical details
03Configuration support
04Selected dimensions, voltage and finish
05Matched controller or driver
06Installation hardware and wiring

Product image