Product details
WiFi LED Strip Dimmer
LumaCircuit offers WiFi LED Strip Dimmer as a configurable LED strip for project builds. Typical applications include CCT and RGB+CCT rooms, Retrofit dimming, Home Assistant lighting zones. wireless controller + 2.4G + WiFi Light Dimmer For Single Color And Dual White Size: 74.5*36*17mm(L*W*H) Total Output Current: 12A The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering. Use this product on the WLED ambient route. Match the controller to the exact LED IC and channel order, voltage, data direction and total load; long runs also need a fuse and power-injection plan. WLED, Home Assistant and any show-control bridge remain separate validation points. For a project brief, include the selected voltage, dimensions, driver and control details so the configuration can be reviewed efficiently.
Product features
The following details summarize the physical characteristics and configuration options for this product. Use the selected variant and production drawing to finalize dimensions and electrical details.
- The wireless controller WiFi LED strip dimmer with WiFi and Bluetooth dual-module design enhances the distribution network experience and improves the distribution network success rate. It can be controlled by a smartphone APP, 2.4G RF remote controls, and third-party voice commands. The installer can adjust the brightness to meet your life needs freely. The wireless controller dimmer supports push dimming for 0-100% stepless dimming without screen flickering.
- wireless controller + 2.4G + WiFi Light Dimmer For Single Color And Dual White
- Size: 74.5*36*17mm(L*W*H)
- Total Output Current: 12A
- WiFi Standard: IEEE 802.11 b/g/n 2.
- Bluetooth Protocol: Bluetooth 4.2
- Remote Control Distance: ≤30m
- Smartphone APP Control(Receiver&Transmitter)
Configuration and technical detail
To configure this product, specify the LumaCircuit SKU, required voltage, light engine, dimensions or cutout, driver/controller and finish or protection variant. The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering.
- Input: 12-24 V
- Size: 74.5*36*17mm(L*W*H)
- Working Voltage: -24V
- Total Output Current: 12A
- Bluetooth Protocol: Bluetooth 4.2
- Remote Control Distance: ≤30m
- 2.4G RF Remote Controllable: wireless controller T1,
- IP Rating: IP20 Non-Waterproof
- Working Temperature: -10-+40℃
- LumaCircuit model: LC-STR-P9591I
- Dimensions found: 74.5x36x17mm / 17mm / 30m
Control and installation
Use this product on the WLED ambient route. Match the controller to the exact LED IC and channel order, voltage, data direction and total load; long runs also need a fuse and power-injection plan. WLED, Home Assistant and any show-control bridge remain separate validation points.
Plan the installation around CCT and RGB+CCT rooms, Retrofit dimming, Home Assistant lighting zones. Keep power, signal, heat path, access and service joints visible in the drawing.
Configuration support
Pricing follows the selected setup. Share the required voltage, dimensions or cutout, light engine, driver/controller and finish or protection option so the product can be specified accurately.
Product overview
The wireless controller WiFi LED strip dimmer with WiFi and Bluetooth dual-module design enhances the distribution network experience and improves the distribution network success rate. It can be controlled by a smartphone APP, 2.4G RF remote controls, and third-party voice commands. The installer can adjust the brightness to meet your life needs freely. The wireless controller dimmer supports push dimming for 0-100% stepless dimming without screen flickering. The WiFi dimmer will receive the signals and transmit them to others within 30 meters; all of them will work synchronously the product has a timing function, the installer can set the opening and closing time according to your lifestyle and fade out/fade in of lighting before falling asleep or waking up. The Bluetooth LED dimmer can work with Amazon Alexa and Google Assistant, and the installer can use voice commands to adjust the LED lights.
wireless controller + 2.4G + WiFi Light Dimmer For Single Color And Dual White
Specifications
Size: 74.5*36*17mm(L*W*H)
Working Voltage: -24V
Total Output Current: 12A
WiFi Standard: IEEE 802.11 b/g/n 2.
Bluetooth Protocol: Bluetooth 4.2
RF: 2.
Remote Control Distance: ≤30m
Smartphone APP Control(Receiver&Transmitter)
Support Third-Party Voice Control
4G RF Remote Controllable wireless controller T1,
WiFi+Bluetooth Dual Module Design
APP Name: mobile app
Group Control
Support Music Rhythm
Timing Function: YES
Falling Asleep/Waking Up Plan Setting
Tap-To-Run/Automation
IP Rating: IP20 Non-Waterproof
Working Temperature: -10-+40℃
Includes
1 * wireless controller WiFi LED Strip Dimmer
Typical applications
- CCT and RGB+CCT rooms
- Retrofit dimming
- Home Assistant lighting zones