Product details
Flexible 24V RGB+CCT COB Strip Lights Color Changing 5M
LumaCircuit offers Flexible 24V RGB+CCT COB Strip Lights Color Changing 5M as a configurable LED strip for project builds. Typical applications include Everyday room lighting, Kitchen and cabinet task light, Retail and commercial fit-outs. The RGBCCT tape lights adopt the newest COB chip-on-board technology, packing 960 PCS LED chips onto a super flexible, 12 mm-wide dual-layer PCB board to result in a flawlessly seamless linear light with zero dark spots or hotspots. Just smooth, continuous illumination that's suited to indoor accent walls, coves, or cabinet lighting where a clean, professional look matters. Pair with the available RGB+CCT LED controller and the installer can choose from over 16 million colors, fine-tune the color temperature between warm white and cool white, and dim brightness from 1% to 100% to match any vibe-whether it's focused task lighting or a cozy movie night. The back features double-sided adhesive tape, allowing you to remove the protector and stick it in a clean place for easy installation. The COB strip lights are not waterproof and are only recommended for indoor use. They are cuttable; just follow the cutting marks along the strip to get your exact desired length. The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering. Use this product on the everyday Zigbee route. A Zigbee gateway or coordinator is required, and ZHA, Zigbee2MQTT and Tuya Gateway must be validated as separate paths on the exact driver, controller and firmware combination. For a project brief, include the selected voltage, dimensions, driver and control details so the configuration can be reviewed efficiently.
Product features
The following details summarize the physical characteristics and configuration options for this product. Use the selected variant and production drawing to finalize dimensions and electrical details.
- Upgrade your lighting game with the configured product 24V RGBCCT COB LED strips- the perfect mix of vibrant RGB color and practical tunable white light. The RGB chips give you millions of colors, while the CCT chips let you dial in the perfect white temperature from warm white to cool white. That means total control over your atmosphere, all in one sleek strip.
- The RGBCCT tape lights adopt the newest COB chip-on-board technology, packing 960 PCS LED chips onto a super flexible, 12 mm-wide dual-layer PCB board to result in a flawlessly seamless linear light with zero dark spots or hotspots. Just smooth, continuous illumination that's suited to indoor accent walls, coves, or cabinet lighting where a clean, professional look matters.
- Pair with the available RGB+CCT LED controller and the installer can choose from over 16 million colors, fine-tune the color temperature between warm white and cool white, and dim brightness from 1% to 100% to match any vibe-whether it's focused task lighting or a cozy movie night.
- The back features double-sided adhesive tape, allowing you to remove the protector and stick it in a clean place for easy installation. The COB strip lights are not waterproof and are only recommended for indoor use. They are cuttable; just follow the cutting marks along the strip to get your exact desired length.
- Length: 5 meters ( 16.4ft ) per roll
- Size ( Width x Height ): 12 mm x 2 mm
- Color temperature adjustable: 3000 K- 6000 K
- Brightness is adjustable from 1% to 100%
Configuration and technical detail
To configure this product, specify the LumaCircuit SKU, required voltage, light engine, dimensions or cutout, driver/controller and finish or protection variant. The technical rows below summarize the physical and electrical details for this product family. Confirm the selected configuration against the production drawing before ordering.
- Input: 24 V
- Light engine: RGB+CCT
- Length: 5 meters ( 16.4ft ) per roll
- Size ( Width x Height ): 12 mm x 2 mm
- Input voltages: DC 24V
- Power: 18W/m
- LED brand: San An
- LED type: 1022
- LED quantity: 960 PCS/m
- Color: RGB+CCT
- Color temperature adjustable: 3000 K- 6000 K
- Mini cuttable length: 41.5 mm
Control and installation
Use this product on the everyday Zigbee route. A Zigbee gateway or coordinator is required, and ZHA, Zigbee2MQTT and Tuya Gateway must be validated as separate paths on the exact driver, controller and firmware combination.
Plan the installation around Everyday room lighting, Kitchen and cabinet task light, Retail and commercial fit-outs. Keep power, signal, heat path, access and service joints visible in the drawing.
Configuration support
Pricing follows the selected setup. Share the required voltage, dimensions or cutout, light engine, driver/controller and finish or protection option so the product can be specified accurately.
Product overview
Upgrade your lighting game with the configured product 24V RGBCCT COB LED strips- the perfect mix of vibrant RGB color and practical tunable white light. The RGB chips give you millions of colors, while the CCT chips let you dial in the perfect white temperature from warm white to cool white. That means total control over your atmosphere, all in one sleek strip.
The RGBCCT tape lights adopt the newest COB chip-on-board technology, packing 960 PCS LED chips onto a super flexible, 12 mm-wide dual-layer PCB board to result in a flawlessly seamless linear light with zero dark spots or hotspots. Just smooth, continuous illumination that's suited to indoor accent walls, coves, or cabinet lighting where a clean, professional look matters.
Pair with the available RGB+CCT LED controller and the installer can choose from over 16 million colors, fine-tune the color temperature between warm white and cool white, and dim brightness from 1% to 100% to match any vibe-whether it's focused task lighting or a cozy movie night.
The back features double-sided adhesive tape, allowing you to remove the protector and stick it in a clean place for easy installation. The COB strip lights are not waterproof and are only recommended for indoor use. They are cuttable; just follow the cutting marks along the strip to get your exact desired length.
Specifications
Length: 5 meters ( 16.4ft ) per roll
Size ( Width x Height ): 12 mm x 2 mm
Input voltages: DC 24V
Power: 18W/m
LED brand: San An
LED type: 1022
LED quantity: 960 PCS/m
Color: RGB+CCT
Color temperature adjustable: 3000 K- 6000 K
Brightness is adjustable from 1% to 100%
Light efficiency: 100-110 lm/W
Dimmable: YES
Mini cuttable length: 41.5 mm
IP Rating: IP20 ( non-waterproof ), IP67 ( silicone waterproof )
Beam angle: 180°
The back has double-sided adhesive tape
Includes
1 * RGBWW COB strip lights
Typical applications
- Everyday room lighting
- Kitchen and cabinet task light
- Retail and commercial fit-outs