LumaCircuit
DIY starting point WLED Ambient & Effects
Pixel Individually Addressable 4 In 1 RGBW SK6812 LED Strip
A serviceable connector component for a complete lighting BOM.
Voltage5 V Light engineRGBW
LumaCircuit / seller + manufacturer + engineering
Smart lighting, built around your idea.
Buy a configurable starting point, or work directly with the manufacturer on the effect, dimensions or detail off-the-shelf products cannot solve. We design and make the light engine, housing, power and control path around your build - from a one-off prototype to a repeatable small run.
- 595
- published product records
- 57
- guides and field notes
- 4
- lab records in review
Reference scene / smart workspace Desk / task light / effect zones LumaCircuit / SolutionsGaming room lighting
Browse the physical product
Start with the light engine.
9 recordsLED Aluminum Channels
Aluminum profiles, diffusers and mounting systems for finished LED strip installations.
View products ->496 recordsLED Strip Lights
LED strips, controllers, drivers and installation accessories for flexible lighting systems.
View products ->
59 recordsIndoor LED Lights
Indoor fixtures for general, task, accent and smart-home lighting.
View products ->
31 recordsOutdoor LED Lights
Outdoor fixtures for gardens, facades, paths and weather-exposed installations.
View products ->Solutions / scene references
Turn the feeling into a buildable system.
Featured product records
Compare the parts before the promise.
Every card starts with the physical item, then exposes the key electrical fact, control route and evidence status. Add a record to your build list when you are ready to ask for a sample.
LumaCircuit
DIY starting point WLED Ambient & Effects
24V WS2814 RGBW RGBIC LED Strips 16.4FT
A serviceable connector component for a complete lighting BOM.
Voltage24 V / 12 V Light engineRGBW
Choose a control route
The protocol follows the hardware.
Use a route as a filter, not a blanket promise. The exact product, driver, firmware and gateway remain visible in the record.
01
WLED effects
->02WLED Ambient & Effects
Addressable LED strips, RGBW linear lighting and effect-led fixtures with local WLED control.
Zigbee lighting
->03Zigbee Everyday Lighting
Downlights, spotlights, panels and everyday white lighting using one Zigbee SKU with separately tested coordinator paths.
Shared components
-> Shared System Components
LED aluminum profiles, drivers, power supplies, connectors, modules and wired control parts that complete a lighting BOM.
Guides & Notes
Solve the decision around the product.
How to choose LED strip lighting: voltage, brightness and IP rating
Choose the installation boundary and the lighting job first. Voltage, IP rating, density, control and power are a system decision, not separate shopping filters.
Choose and install LED strip lighting: a field-ready checklist
Turn the room, mounting surface, cut plan, thermal path and control needs into an installation that can be tested and repaired.
Addressable LED strips and WLED: verify the signal before the effects
Identify voltage, IC, data direction, channel order and power injection before configuring an addressable lighting system.
Build Logs
Real systems, including the unfinished parts.
BUILD / 01Media-room wall-wash starter
A diffused effect layer behind a screen or desk, with a short first run and a documented path to longer sections.
- Light
- Female DC Solderless LED Strip Connector
- Power
- 24 V / injection plan
BUILD / 02Kitchen and cabinet task-light system
Quiet, useful light under cabinets and inside joinery, with CCT and the control gateway chosen as separate decisions.
- Light
- DC12V 3528 60LEDs Per Meter LED Strip Light
- Power
- Low voltage / driver review
BUILD / 03Everyday room downlight sample
A single downlight sample used to verify pairing, dimming, CCT, reset, power recovery and entity mapping before a batch.
- Light
- DC12V 3528 60LEDs Per Meter LED Strip Light
- Power
- Driver dependent / sample first
Compatibility + Test Lab
Know what is tested, documented or still open.
LAB / 01Power budget method for addressable lightingMethod ready / A repeatable worksheet for nominal load, headroom, injection points and fuse assumptions.->LAB / 02RGBW downlight thermal check / revision AValidation pending / Fixture, ambient and drive-current fields are defined; measured production data is not published yet.->LAB / 03WLED regression matrix for controller profilesTest plan / Tracks firmware, color order, effects, presets, restart recovery and Home Assistant entity behavior.->LAB / 04CCT flicker measurement planNot yet measured / Defines instrument, PWM conditions and reporting language before any flicker-free claim is made.->
Tools for the workbench
Turn a shortlist into a buildable BOM.
Use the small utilities to estimate power, identify a pixel path, compare records and prepare the details for your project.
Concept / sample / small batch
Make the idea real. Then make it repeatable.
Whether you are building one statement piece, refining a gaming room or bar scene, or preparing a small run, send us a sketch, dimensions, reference image or control preference. If you are unsure whether the LED, controller, driver, power supply and control path will work together, we will help check the configuration before you buy. This pre-purchase review and matching guidance are included at no extra charge.